01Gazebo Demolition & Site Cleanup
Removing the old gazebo built over a previously filled swimming pool and clearing the work area for the new property entrance.
Watch on YouTube ↗A complete property entrance built along a busy FM road—from gazebo demolition and culvert excavation through compacted base and an asphalt-millings finish.
This Van Alstyne project turned an unusable area into a stable new entrance. The work began with demolition and cleanup, then moved through culvert installation, on-site borrow excavation, lift compaction, crushed-concrete base and a packed asphalt-millings surface.
Follow the project from the first demolition through the culvert installation, driveway build and final asphalt-millings surface.
01Removing the old gazebo built over a previously filled swimming pool and clearing the work area for the new property entrance.
Watch on YouTube ↗
02Cleaning up the remaining demolition debris and laying out the driveway approach along the busy FM roadway.
Watch on YouTube ↗
03Preparing the drainage crossing and excavating suitable material from the property to build the driveway embankment.
Watch on YouTube ↗
04Setting the culvert, building the approach with borrow material and placing compacted crushed-concrete base in controlled lifts.
Watch on YouTube ↗
05Finishing the entrance with asphalt millings, packing the surface and completing the transitions around the culvert and roadway.
Watch on YouTube ↗A lasting entrance depends on what is below the driving surface. Each phase was built to support the next while preserving roadside drainage and creating reliable property access.
The old gazebo and debris were removed first, opening the site and creating room to lay out the new driveway approach.
The roadside crossing was excavated and the culvert installed to maintain the existing drainage path beneath the new entrance.
Material excavated from the on-site borrow pit was placed and compacted in lifts to build the driveway embankment.
Compacted crushed concrete provided structural base, followed by asphalt millings shaped and packed into the final driving surface.
DFW Excavation handles culverts, driveway approaches, drainage, grading and aggregate-base construction across Van Alstyne and North DFW.
Send the location, driveway dimensions, roadway conditions and any available culvert or drainage requirements. We'll review access, materials and the conditions that drive pricing.